DEBUG WAVES -- vsim test_oe_demo -do "add wave *;add wave /test_oe_demo/simulation/*;run -all" -- Note: By specifying the process name, you get the variables ...
http://mysite.verizon.net/miketreseler/oe_demo.vhd
... local/vlsi/software/V-System/modeltech/sunos5/../std.standard # Loading work.counter(only) VSIM 1> view * VSIM 2> force clk 1 50, 0 100 -repeat 100 VSIM 3> wave /* VSIM 4 ...
http://www.dcs.gla.ac.uk/~nicholas/ca4/vsystem.html
... vsim -Gtemplate_g=s_rst -c test_uart -do "run -all; exit" -- slow baud: vsim -Gtb_tics_g=42 -c test_uart -do "run -all; exit" -- run with waves: vsim test ...
http://mysite.verizon.net/miketreseler/test_uart.vhd
To view the wave window, from the ModelSim vsim transcript window menu, choose View | Wave. From the signals window menu, choose View | Wave | Signals in Region.
http://www.cs.ucsd.edu/classes/sp02/cse291_E/CAD/tutorial1.html
To add a register to the wave window, use. VSIM> add wave /GPR0. Using ModelSim Helper Scripts for Viewing PowerPC Registers. In addition to the compile script for ...
http://toolbox.xilinx.com/docsan/xilinx8/help/platform_studio/html/ps_p_sim_accessing_smartmodel_internal_signals.htm
... Sh, M, VOptimize design (see Performance below) vsim Sh, M, VLoad design (see below) add list | wave V Add signals to the List or Wave windows add log V Log signals to vsim.wlf file for ...
http://www.ece.cmu.edu/~kbiswas/qk_guide.pdf
... VDefines or displays library mappings vsim Sh, M, VVHDL and/or Verilog Simulator (see below) add list | wave V Add signals to the List or Wave windows add log V Log signals to vsim.wlf ...
http://attila.sdsu.edu/~waheed/compe475/Modelsim/modelsim_qk_guide.pdf
3.) in vsim use the mouse to wiew->wave. 4.) in the wave window. a. File->open->Dataset i. use the browse button to open ...
http://www.arl.wustl.edu/projects/fpx/cse465-s05/hw/hw1/HW1.htm
VSIM >s.. # vsim +nowarnTFMPC -t ps test_bench # ** Note: (vsim-3812) Design is being ... Error in macro ./wave_presets.do line 10 # (vish-4014) No objects found matching '/test ...
http://www.altera.com/support/kdb/solutions/rd02082008_85.html
To optimize a large amount of sub-system, parallel processing is required. Performance Response Optimizer SIMULATION WAVE -RT WAVE -RT VSIM VSIM Engine Calibration Engine design parameters ...
http://www.ricardo.com/download/pdf/SystemEngineeringSimulation.pdf
The waveform viewer pops up. VSIM 3> add wave SW VSIM 4> add wave BTN1 VSIM 5> add wave LD 8. Now we come to the part where we want to apply some test values and test the output based ...
http://personalwebs.oakland.edu/%7Emsharawi/ModelSim_Tut_F03.pdf
VSIM nn > add wave /inverter/* The following wave window appears. Change your input focus to your Simulink model window. Start a Simulink simulation.
http://www.mathworks.com/access/helpdesk_r13/help/toolbox/modelsim/a1065618422.html
The vcd2wlf utility converts the VCD file to a WLF file that you display with the command vsim -view. In ModelSim, open the wave file MyVCDfile.wlf as data set MyVCDwlf by entering the ...
http://www.mathworks.com/access/helpdesk/help/toolbox/edalinks/modelsim/bregr58-72.html
That way you can load the simulation, define your wave windows, etc. with the macro script using commands that are native only to VSIM. --Eric ----- Original Message ----- From ...
http://csociety.ecn.purdue.edu/pipermail/plug/2003-April/009704.html
... Verilog Simulator (see below) add button M, V Adds a button (i.e. add button MyRun {run 5000} ) add list | wave V Add signals to the List or Wave windows. add log V Log signals to vsim.wav ...
http://courseware.ee.calpoly.edu/cpe-269/ExternalDocs/ModelSIm5_2_quickguide.pdf
... vsim top-or-VSIM button 6) View all the Model Sim debugging windows. VSIM> view *-or-View > All 7) Wave and list signals of interest in the design. VSIM> wave /*-- Adds all top level ...
http://www.model.com/company/fpga/documents/100exemxilinx.pdf
The DTMF detection tests were run using the VSIM simulator and digitized Bellcore and Mitel test tape sample files. 2) Nominal power level was -16 dBm0 unless noted otherwise.
http://www.mesi.net/MESiWeb/Digit%20Detector%20Preformance%20data.htm
biu.cmd. biu.wave.cmd. ccm.cmd. ccm.wave.cmd. cmd. compare. fifo.cmd. l. quickhdl.ini. ram_data.txt. src. test.ccm. testccm.wave.cmd. verify. vsim.wav. work
http://web.cecs.pdx.edu/~mperkows/CLASS_VHDL_99/CCM_QIHONG/l
... Sh, M, V Defines or displays library mappings vsim Sh, M, V VHDL and/or Verilog Simulator add list | wave V Add signals to the List or Wave windows add log V Log signals to vsim.wlf file for ...
http://www.engineering.sdsu.edu/~waheed/compe475/Modelsim/introduction_modelsim.pdf
Then choose view->Wave from the ... VSIM> run 200 You can also use the run-menu of the command window. You will see the simulation proceeding in the Waves-window and in the List-window.
http://www.ecdl.tkk.fi/~cad/TAPS-digital/synt_sim/presynth_sim_en.html |
|
